- Steel Wire Mesh[10]
- Metal Building Materials[5]
- Iron Wire Mesh[9]
- Fencing[7]
- Corner Guards[1]
- Conveyors[7]
- Plastic Nets[7]
- Fishing Net[5]
- Barbed Wire[1]
- Welding Rods[1]
- Fiberglass Mesh[1]
- Contact Person : Mr. Ma Chuncheng
- Company Name : Anping Changsheng Wire Mesh Co., Ltd.
- Tel : 86-318-8068728
- Fax : 86-318-7533121
- Address : Hebei,Anping,Mazhuang Village, Dahezhuang Town
- Country/Region : China
- Zip : 053600
high quality fiberglass mesh(factory)
pepair the cracks and johnts of
drywall,plasterboard,stucco,and repair
other damages in other wall surface.
performance as follows:good performance of alkaline-resistancehigh tensile strength and deformation-
resistanceecellent self-adhesive performance
direction of application:1.wall must be clean and dry.2.center and apply tape over the length
of the joint,pressing firmly3.apply a generous first coat of compound
over the mesh,masking sure to
completely fill the joint has benn
complete filled,wipe off any excess
compound with the drywall knife leaving
enough to cover the tape.4.let dry completely,then sand slightly.5.apply suffcient thin finishing coats to
produce a smooth wall surface.6.cut or butted bards do not have tapered
edge.thereore,special care must be taken
to assure proper compound penetration
of all joints.this may result in slight build
-up of compound that will require an
increased amount fo edge feathering.
pepair the cracks and johnts of
drywall,plasterboard,stucco,and repair
other damages in other wall surface.
performance as follows:good performance of alkaline-resistancehigh tensile strength and deformation-
resistanceecellent self-adhesive performance
direction of application:1.wall must be clean and dry.2.center and apply tape over the length
of the joint,pressing firmly3.apply a generous first coat of compound over the mesh,masking sure to completely fill the joint has benn complete filled,wipe off any excess
compound with the drywall knife leaving
enough to cover the tape.4.let dry completely,then sand slightly.5.apply suffcient thin finishing coats toproduce a smooth wall surface.6.cut or butted bards do not have tapered edge.thereore,special care must be taken to assure proper compound penetration of all joints.this may result in slight build-up of compound that will require an
increased amount fo edge feathering.
high quality fiberglass mesh(factory)